Get A Quote

Siloxane WB Sealer (exterior/interior)

A water-based, clear, deep-penetrating, water repellent applied over untreated masonry and concrete surfaces. Used on concrete and natural stone wall as well as concrete floors. A CLEAR, WATERBORNE, PENETRATING, WATER REPELLENT APPLIED OVER UNTREATED MASONRY AND CONCRETE SURFACES.

$43.33

Product Description

SILOXANE WB ian an interior/exterior grade, clear, waterborne, penetrating water repellent designed to be applied over a variety of untreated, properly prepared substrates including brick, concrete, concrete pavers, concrete block, stucco, limestone, granite, sandstone, terracotta and natural stone. Siloxane WB provides excellent water repellency helping to reduce cracking, spalling, freeze/thaw and chemical damage. Siloxane WB inhibits the growth of mold and mildew. Reduces deterioration preventing dust and lengthening the life of the substrate to reduce maintenance cost. Siloxane WB dries clear on most substrates maintaining a natural appearance. Siloxane WB leaves a matte or semi-gloss finish depending on application.

Additional Details
Siloxane WB Uses and Advantages:
* Water repellent for brick, concrete, concrete pavers, concrete block, stucco, limestone, granite, sandstone, terracotta and natural stone. * Breathable, does not form a film. * Dries clear on most substrates maintaining the natural appearance of the substrate. * Low odor and VOC compliant. * May be used for interior or exterior and vertical or horizontal surfaces.
Siloxane WB Surface Preparation:
Siloxane WB is designed to be applied over untreated concrete and masonry surfaces. For optimum performance all new masonry, concrete and stucco must age at least 28 days prior to application. Surfaces to be coated must be DRY, sound and clean. Siloxane WB will not fill voids or bridge cracks. All deteriorated mortar joints, voids and cracks must be re-pointed or patched with Umaco U-Patch or equivalent and then allowed to cure. Remove all dirt, dust, spalling or loose concrete, oil, grease, wax, mildew, efflorescence, curing compounds, form release agents, paint or any other foreign material which might affect the bond.
Siloxane WB Coverage:
Please note that coverages will vary depending on the texture and porosity of the surface being coated. Approximate square foot coverage per ONE gallon: Concrete Block.……………80-100 sq. ft. Concrete Pavers……….….80-100 sq. ft. Porous Brick……………….80-100 sq. ft. Limestone.………………….80-100 sq. ft. Stucco……….……………..80-125 sq. ft. Granite….………………….80-125 sq. ft. Concrete……………………80-125 sq. ft. Dense Brick……….……..100-125 sq. ft.
Siloxane WB Date sheet:
http://www.umaco.com/sites/umaco.com/files/pdf/data/Siloxane%20WB%202012.pdf
Siloxane WB MSDS Safety Sheet:
http://www.umaco.com/sites/umaco.com/files/pdf/msds/Siloxane%20WB.pdf